6.2. Supplying Cleaner Fluid

When the level of the cleaner fluid in the stripper unit is running low, the error indicator  will flash. There is enough fluid left to strip one more lane.
Re-filling the cleaner fluid requires the following actions:

1. Open the lid of the stripper unit
2. Remove the re-filling cap  from the clean water tank.
3. Place a funnel in the cap opening.
4. Pour at the most five liters (1.3 gallons) of water mixed with cleaner through the funnel into the tank.
5. Place the re-filling cap  back on the tank and tighten it firmly with your hand.