 |
| The first screen shows the three oiling profiles: "Recreation",
"Tournament", and "League". Each profile can be viewed, changed and
activated on the machine. Whenever the settings are changed, the
software automatically calculates the corresponding amount of oil that
will be applied onto the lane, and the time it will take the machine to
treat the lane. If you have noticed that your machine is using more, or
less oil than the software has calculated, it is possible to calibrate
the machine, simply by specifying how many lanes you can treat on one
liter of oil. This means that you can calibrate your machine without
even needing an oil tape
reader! |
| |
 |
| This screen shows the settings for the short run program. In the
short run program, only the first few feet of the lane are oiled, and no
cleaning is done. This can be useful when you want to restore the lane
conditions but there is little time, or if you want to lay an oil
pattern that lasts longer. The short run program can be started by
pressing the "Start" button twice in quick succession (double-click). |
| |
 |
| This screen shows the basic and advanced settings for the cleaning
of each lane. As you change the settings, the amount of used cleaner is
shown. The time needed to clean the lane is also calculated. Adding that
to the time needed to oil the lane results in the total time needed to
treat one lane. |
| |
 |
| During operation, the machine keeps track of the usage of important
components. The 'Statistics' screen gives you an overview of that usage
data. Based on this data, Levab can advise you on the maintenance of
your machine. |
| |
 |
| An interactive screen that offers the possibility to turn on
individual components, so that you can easily track down problems. Just
move your mouse pointer above the component you'd like to activate or
turn on. The component will turn blue. Then click to activate, and click
again to turn off. |
| |
 |
| During operation, the machine monitors various 'health' indicators.
When a problem arises, this is shown on the built-in LCD display. The
'Machine Diagnostics' screen of the 'X-treme Control Panel' gives help
and hints how to solve the problem. It also gives a direct link to the
manual. When clicking the link, the manual will be opened for you, even
at the right page! |
| |
 |
| This screen shows additional data of your machine, such as software
version, serial number. You can fill in a name for your machine, which
is useful when you have more than one machine. The name will be shown at
the top of the window. The name will also be shown in the list of
machines (see the last screen), which
appears when you click "Select Machine...", in the "Tasks" panel on the
left. |
| |
 |
| The "Extra Machine Settings" are some settings that you would not
normally change. In the section "X-treme Control Software" you can
specify what to do when a new version is available, and which language
the software should use. |
| |
 |
| Whenever you have realized a good scoring condition, you never have
to lose it. Save the settings of the machine by clicking "Save
Settings..." in the "Tasks" panel. Whenever you want to go back to those
settings, click "Old Settings" in the "Menu" panel, select the settings
in the table, and click "Activate". It's as simple as that! |
| |
 |
| Centers that own more than one machine can easily view all the
settings, statistics and diagnostics of each machine. Just click "Select
Machine...", in the "Tasks" panel on the left, and a list of machines
appears. |