Welcome to the Levab X-Treme!

• No Rollers, No Buffers, No Wicks: the lane oil is applied directly onto the lane by means of air atomizing spray nozzles (patented “Direct Spray Application” system).

• NO "zig-zag" effect in the oil pattern.

• NO influence of air humidity, lane irregularities, dust, etc. on the oil pattern.

• Always the same oil conditions, from day to day and from season to season.

• Our new HOT AIR system will make sure your lane is perfectly dry when the lane is cleaned. The Levab X-Treme is the only machine that uses two hot air blow nozzles to dry the lane.

• Suitable for All lane oils, from low to ultra-high viscosity.

• Light-weight construction: machine weighs only 100 kg (220 lbs). Even better: all the weight is concentrated at the rear end of the machine so that it is very easy to tilt the machine into its upright position.

• Short-run program for applying extra oil on the first 10-20 feet (adjustable).

• Uses very little lane cleaner: will clean up to 40 lanes on one tank filling. Water pump in cleaning unit has an adjustable pump duty cycle between 10% - 100% for optimal adjustment to your lanes

• The oil tank is large enough to condition 60 lanes or more.

• Standard equipped with float switches inside both the oil tank and the cleaner tank to guarantee you will never run out of fluids while conditioning your lanes. The machine will indicate in advance, so that you can finish your lane maintenance before having to fill up.

• 3 Pre-programmed oiling profiles that can be quickly selected: 'Recreational', 'League', and 'Tournament'. Can be easily adjusted.

• Indicates when the oil level in the oil tank is running low. At indication, enough oil is left for at least 12 more lanes.

• Built-in jamming and overload protection.

• Conditioning session time: 60 sec per lane on average (cleaning and oiling combined).

• Microprocessor controlled with self-diagnostic system: the machine checks its own operation and indicates problems on the LCD display.

• Sturdy and Robust! Stronger frame (35 x 35 mm), thicker, anodised aluminum sheeting (3 mm)

• Large handle bar for improved handling.

• Blue illuminated Start/Stop button, located conveniently on handle bar, combines four functions:
  • Press once to start normal lane treatment session
  • Press twice to start short-run lane oiling session
  • Press short during treatment session to stop lane treatment session temporarily
  • Press long during treatment session to abort session completely

• Improved, safe power-inlet

• Professional LCD display with 'Daily' and 'Special' menu. Easy switching between modes "oil-only", "clean-only" and "oil-and-clean".

• LCD display menu texts can be switched in 4 languages: English, German (Deutsch), Dutch (Nederlands) and Spanish (Español)

• Strong, tough operations buttons for life-long duty.

• Soft-Edge sheeting has been folded in operator-friendly way.

• Two high-performance ventilator fans control the temperature of the electrical components and oil.

• Larger Water Tanks.

• Emergency stop button and activity indicator.

• Test menu on LCD for easy testing of critical components.

• Wiper brush in front of squeegee for 100% clean lane, even for high-viscosity oil in a pattern as thick as 150 units.

• Higher and better placement of oil spray nozzles, 'Top Hat' oil pattern.

• Complete re-design and re-evaluation of critical components.

• Easy placement of components: each component can be easily replaced by untightening at most 4 screws or bolts. Makes troubleshooting and part replacement very easy.

• Oil pattern symmetry can be adjusted: more oil can be applied on the left or right side of the lane.

• Adjustable speed during cleaning from 30 cm/sec up to 90 cm/sec in steps of 5 cm/sec.

• High density oil equalizer brush separately controlled, for the finishing touch of your oil pattern, even at the beginning of the lane.

• Power consumption: max. 2000 Watts during full operation; 15 Watts in stand-by mode.

• Voltage: 220V/50 Hz or 115V/60 Hz.

• Dimensions: 1370 x 330 x 980 mm (W/H/D) (54 x 13 x 39 inches) including projecting parts and controls.

• Weight: 100 kg (220 lbs).

Deutsch / German

PDF einteilung